|
Single Flue Chimney Caps
|
Protect and extend the life of you flue and
chimney.
The single chimney cap, is used for a chimney
that has either one flue or multiple single flues spaced at leased 6 inches
apart.
Easy Installation, just slip over
flue and tighten 4 bolts.
If your flue or flues are even or below the crown ( the cement top of
most chimneys ) or in poor shape, a "leg kit" can be used
for proper installation.
If you are burning wood, a 5/8"
spark
arrestor mesh can be used, check your local Code.
Sometimes the most economical solution to a
chimney flue downdraft, wind related puff back or chimney odor problem
is a simple chimney cap.
|
|
FOREVER CAPS
3/4" mesh is standard
optional 5/8" spark arrestor mesh |
 |
18 gauge 1 piece base /
24 gauge hood Type 304 Stainless Steel
Available in copper
copper cap
detail pictures |
|
STOCK SIZES
|
WILL FIT FLUE SIZES
|
|
 8"
x 8"
|
6 1/2" x 6 1/2" to 9" x
9"
|
|
8"
x 13"
|
6 1/2" x 11" to 9" x 13
1/2"
|
|
8"
x 17"
|
6 1/2" x 16" to 9" x
19"
|
|
13"
x 13"
|
11" x 11" to 14" x 14"
|
|
13"
x 17"
|
11" x 16" to 14" x 18
1/2"
|
|
17"
x 17"
|
16" x 16" to 18 1/2" x 18
1/2"
|
|
LIFETIME WARRANTY
U.S. PATENT NO. 4,732,078 |
And remember, measure twice order once. |
Call 1-800-685-8263 or e-mail us at
volkosupply@yahoo.com
Chimney Cap Measuring
for single flue chimney caps made easy.....
Lets climb that ladder once.....
measure "everything" twice.
|
 |
Always measure a flue side to side,
never corner to corner. A flue may
be square, rectangular, oval or round. Measure accordingly.
Provide the inner and outer measurement to size
other options such as top sealing dampers.
If the flue is flush, recessed or it's just a
"hole"... measure it's opening in the crown. |
A & B Measure to the
OUTER most edge of the chimney's top.
The chimney's cement "crown".
C & D
Measure the span or OUTER most edge of the flue.
E Measure
EVERYTHING
else... the spacing to each edge
of the chimney, etc.
H
Measure the height of the flue. |
 |
Flue
Liner -- Usually a high temperature clay (fireclay). A round, square
or rectangular sleeve lining the interior of masonry chimneys. This is the
pathway in which the "smoke" or flue gases pass through to exit into the
atmosphere.
(Some chimney were constructed with no clay liner or metal pipe was used as the
flue pipe.)
**Always measure a flue side to side, never corner to
corner.
Chimney Crown -- Also called
a "wash"... is usually a cement topping around the flues and tapered to the
chimneys sides to shed water.
(Some crowns are tapered more than others and may create a more difficult cap
installation.)
We do not need to have a "sale" to give you the
best price.
Shipping is from our location or
direct from the manufacturer,
whichever location is most economical.
No stories. You get your cap quickly and easily, usually within in a few
days.
Even customs!
 |
 |
 |
 |
 |
| Single Caps |
Double Caps |
Multiple Caps |
Round Caps |
PreFab Caps |
| |
|
|
|
|
 |
 |
 |
 |
 |
| Vacu Stacks |
Turbines |
Weather Shield Caps |
Chimney Fans |
Damper Caps |
| |
|
|
|
|
Click the links below for
some tips and explanations....
|
